Restoring Trust in NAV 2015 Inventory: 8,000 Outdated Orders Closed

OmniVue helped a Georgia luxury bath fixture manufacturer with 100+ employees, stabilize inventory and manufacturing in Microsoft Dynamics NAV 2015. The work started as inventory stabilization and troubleshooting, then became a broader effort to improve processes, inventory controls, and operational efficiency. OmniVue closed approximately 8,000 outdated orders, removed approximately 7,430 pages of obsolete reservation entries, and corrected a component item quantity associated with production requirements from approximately 639,000 pounds to approximately 58,775 pounds. That change was a correction of the recorded quantity, not a reduction in physical inventory. Production and warehouse teams now have a more reliable foundation, and NAV can be trusted significantly more than before. Operational benefits are being worked toward and are not yet measured.

Microsoft Dynamics NAV 2015 • Inventory management • Manufacturing • Barcode scanning • Production Travelers • Order processing • Costing and financial processes

Customer Snapshot

At a glance

Industry: Luxury bath fixture manufacturing

Location: Georgia

Employees: 100+

System: Microsoft Dynamics NAV 2015

Solutions: Inventory management, Manufacturing, Barcode scanning, Production Travelers, Order processing, Costing and financial processes

Author: Richard Nester

Result: Approximately 8,000 outdated orders closed, approximately 7,430 pages of obsolete reservation entries removed, and a recorded component quantity corrected from approximately 639,000 pounds to approximately 58,775 pounds. NAV can be trusted significantly more than before. Operational benefits are not yet measured.

Outdated orders closed

Approximately 8,000

Old production and purchasing records

Obsolete reservations removed

Approximately 7,430 pages

Reservation entries that were tying up inventory

Recorded quantity corrected

Approx. 639,000 lb to 58,775 lb

A correction of the recorded quantity, not a reduction in physical inventory

The Challenge

Why did a Georgia luxury bath fixture manufacturer lose confidence in NAV inventory numbers?

A Georgia luxury bath fixture manufacturer came for help resolving inventory accuracy and manufacturing issues in their Microsoft Dynamics NAV 2015 system. There were problems with inventory quantities, outdated production and purchase orders, and reservations that prevented inventory from being used correctly.

These issues affected production planning, warehouse operations, and the ability to trust inventory numbers in NAV. The biggest impact was the loss of confidence in NAV.

Before the cleanup

NAV contained years of outdated production orders, purchase orders, and reservations. It might show materials as available when they were not physically there, or as unavailable when they were in the warehouse.

Production could not rely on NAV to confirm materials for an order. The team might start a production order only to find materials missing, or find that NAV would not allow consumption because of incorrect quantities or outdated reservations. That caused delays, interruptions, and extra work.

Warehouse staff spent time physically checking inventory, researching discrepancies, and working around system issues instead of picking, transferring, and moving materials.

With multiple production buildings, materials could physically arrive at a production building before the transfer order was received in NAV. Employees then tried to consume material that NAV still showed in the original location or in transit. Inventory might also be tied up in reservations against inactive production orders.

Employees relied on their own knowledge and manual checks rather than the system, and developed workarounds that created further discrepancies.

The Solution

The work started as inventory stabilization and troubleshooting, then evolved into a broader effort to improve manufacturing processes, inventory controls, and operational efficiency. The aim was to make NAV more reliable, reduce manual work, restore confidence in the system, and give the team better visibility and control over day-to-day operations.

Cleaning up historical data was the first step. The next was improving processes and controls to prevent the same problems from recurring. The work moved from fixing errors after they occurred to preventing them. That process focus is the same kind of work described on OmniVue’s Business Process Consulting page.

Key work

  • Closed approximately 8,000 outdated orders (old production and purchasing records).
  • Removed approximately 7,430 pages of obsolete reservation entries.
  • Identified and corrected inventory discrepancies, including a component item whose quantity associated with production requirements was reduced from approximately 639,000 pounds to approximately 58,775 pounds after cleanup. This was a correction of the recorded quantity, not a reduction in physical inventory.
  • Reviewed purchasing, manufacturing, and inventory transfer processes to find root causes.
  • Improved the inter-building process so inventory transfers are properly received in NAV before materials can be consumed in production, rather than repeatedly adjusting quantities.
  • Inventory management work covering accuracy, reservations, transfers, and physical inventory.
  • Manufacturing work covering production order processing, material consumption, and the sales order to production order relationship.
  • Barcode scanning in production and packing, designed around employee workflow, with controls to prevent duplicate scans and clearer visibility into which production orders were scanned.
  • Production Travelers functionality to track, print, and manage production orders.
  • Order processing across sales, production, purchasing, and shipping.
  • A costing review covering standard costing, overhead allocation, waste allocation, and inventory valuation.

The Results

Cleanup results

Approximately 8,000

Outdated orders closed

Approximately 7,430 pages

Obsolete reservation entries removed

Approx. 639,000 lb to 58,775 lb

Recorded component quantity corrected

The quantity change is a correction of the recorded quantity, not a reduction in physical inventory. Operational benefits are being worked toward and are not yet measured.

The confirmed cleanup results are approximately 8,000 outdated orders closed, approximately 7,430 pages of obsolete reservation entries removed, and a major inventory quantity discrepancy corrected: a component item quantity associated with production requirements went from approximately 639,000 pounds to approximately 58,775 pounds. That change was a correction of the recorded quantity, not a reduction in physical inventory.

The work also removed a substantial amount of historical data that had been undermining inventory reliability, improved controls around manufacturing and warehouse transactions, and established a better foundation for accurate inventory management.
Production and warehouse teams now have a much more reliable foundation, and many causes of misleading inventory availability have been eliminated. Improved barcode scanning, production order tracking, and the Production Traveler process give better visibility into order status, reduce manual tracking, and help prevent duplicate transactions.

NAV can be trusted significantly more than before. Operational benefits are being worked toward and are not yet measured.

Why it worked

The project succeeded because the team worked from how production and warehouse employees actually operate, not from NAV alone.

  • The work started with what people were physically doing. OmniVue collaborated directly with the manufacturer's employees to understand what they were doing, when, and how those activities translated into system transactions, rather than looking at NAV alone or simply making technical changes.
  • The inter-building process was fixed, not just the numbers. Learning that physical material movement between buildings and NAV transfer transactions happened out of sequence led the team to fix the underlying process instead of repeatedly adjusting inventory. Transfers are now properly received in NAV before materials can be consumed in production.
  • Barcode improvements followed the way employees actually scan. Controls were added to help prevent duplicate scans, with clearer visibility into which production orders were scanned.
  • The focus was on keeping numbers accurate tomorrow, not only correcting them today. After the historical cleanup, the work moved to processes and controls that prevent the same problems from recurring.

This is also a useful example for other manufacturers that need to trust inventory and production data in Dynamics NAV. See more of this kind of proof on the Case Studies page.

What’s next

Operational benefits are still being worked toward and have not yet been measured. Planned next steps include:

  • Establishing metrics with the manufacturer to quantify operational improvements for employees who use NAV daily, such as cycle count discrepancies, time spent researching inventory, and duplicate scans.
  • Continuing work on inventory costing, valuation, and other operational improvements.
  • Using ongoing cycle counts and operational feedback to validate inventory accuracy.

Statement from the OmniVue team

Our work with this manufacturer went beyond fixing inventory discrepancies in NAV. By understanding how their production and warehouse teams actually operate, we were able to address the underlying causes of those issues, improve their manufacturing processes, and build a stronger foundation for reliable inventory management. The real value isn't just correcting the numbers today—it's helping ensure they stay accurate tomorrow.

Richard Nester, Senior Microsoft Dynamics NAV/Business Central Consultant & Developer, OmniVue

Have inventory numbers you cannot trust?

If inventory accuracy or manufacturing processes in Dynamics NAV are getting in the way, we will take a look with you. Here are two ways to start, both free and with no obligation.

Bring Us Your Challenge

Tell us one problem. You get a free call plus a short written recommendation. We reply within 2 business days.

Bring Us Your Challenge

Upgrade Readiness Assessment

A free, no-obligation call about your NAV version and what a move to Business Central could look like.

See the Assessment

Frequently Asked Questions

Why did a Georgia luxury bath fixture manufacturer need help with inventory in Microsoft Dynamics NAV 2015?

A Georgia luxury bath fixture manufacturer came for help resolving inventory accuracy and manufacturing issues in their Microsoft Dynamics NAV 2015 system. There were problems with inventory quantities, outdated production and purchase orders, and reservations that prevented inventory from being used correctly. These issues affected production planning, warehouse operations, and the company's ability to trust inventory numbers in NAV. The biggest impact was the loss of confidence in NAV.

What did OmniVue do to stabilize inventory and manufacturing for this manufacturer?

The work started as inventory stabilization and troubleshooting, then evolved into a broader effort to improve manufacturing processes, inventory controls, and operational efficiency. Cleaning up historical data was the first step. The next was improving processes and controls to prevent the same problems from recurring, moving from fixing errors after they occurred to preventing them. That work included closing approximately 8,000 outdated orders, removing approximately 7,430 pages of obsolete reservation entries, correcting recorded inventory quantities, improving the inter-building transfer process, and improving barcode scanning, production order tracking, and the Production Traveler process.

What results did the Dynamics NAV 2015 inventory work deliver?

OmniVue closed approximately 8,000 outdated orders, removed approximately 7,430 pages of obsolete reservation entries, and corrected a major inventory quantity discrepancy: a component item quantity associated with production requirements was changed from approximately 639,000 pounds to approximately 58,775 pounds. That change was a correction of the recorded quantity, not a reduction in physical inventory. The cleanup removed a substantial amount of historical data that had undermined inventory reliability, improved controls around manufacturing and warehouse transactions, and established a better foundation for accurate inventory management. Many causes of misleading inventory availability were eliminated, and NAV can be trusted significantly more than before. Operational benefits are being worked toward and are not yet measured.

Why did the inventory work succeed?

OmniVue collaborated directly with the manufacturer's employees to understand what they were physically doing, when, and how those activities translated into system transactions, rather than looking at NAV alone or simply making technical changes. For example, learning that physical material movement between buildings and NAV transfer transactions happened out of sequence led the team to fix the underlying process instead of repeatedly adjusting inventory. Barcode improvements were designed around how employees actually scan. The work focused on processes and controls that keep numbers accurate tomorrow, not just correct today.